新专利产品：DMX512无线发射YH8061-2.4G 配 + （无线四路解码器）​YH84863-2.4G

New patented product: DMX512 wireless transmitter YH8061-2.4G with + (wireless four-way decoder) ​YH84863-2.4G

https://youtu.be/UcEVNwMc3CA

DMX512无线智能控制系统，只需要在灯具上接上我们的接收模块，由发射主控发射信号，就可以实现控制灯具了，不需要信号线，无分控，无信号放大器和信号中继器等，灯具与控制器独立通讯，产品用于投光灯及洗墙灯，户外领域：公园、文旅、桥梁、别墅、山体，湖泊等.

DMX512无线发射YH8061-2.4G

DMX512 wireless intelligent control system, only need to connect our receiving module to the lamp, and the main controller transmits the signal to control the lamp, no signal line, no sub-control, no signal amplifier and signal repeater, etc. , The lamps and the controller communicate independently. The products are used for flood lights and wall washers. Outdoor fields: parks, cultural tourism, bridges, villas, mountains, lakes, etc.

DMX512 wireless transmitter YH8061-2.4G

（无线四路解码器）YH84863-2.4G

(wireless four-way decoder) YH84863-2.4G

简介
无线DMX512收发模块为TOPTRON原创技术，采用32位高性能计算，以无线的方式传输标准的DMX512数据，也可传输灯具与灯具间的联机数据。该产品彻底解决了灯光控制台与灯，灯与灯之间数据的无线传输，完全去掉长期以来所依赖的双绞线。专有技术克服市场上类似设备传输延迟，丢包严重等问题，在数据的传输过程中做到无时延，数据实时可靠！该产品采用2.4G全球开放ISM频段，免许可证使用. 高效GFSK调制，126频道自动跳频通信设计，抗干扰能力强。 
特点
独有可拆卸天线设计 
专有技术克服市场上类似设备传输延迟，丢包严重等问题。链路预算大，通讯稳定可靠 
三基色LED显示工作状态和参数，单键操作，传输无延迟，收发一体，自动切换 
7组ID编码可设置，用户可在一个地方使用独立的7组无线网络而互不干扰 
输入电压5V DC 电流500mA 
通讯距离：600米（空旷场所，视环璄的不同而有所改变） 
工作频段：2.4G; ISM，126个频段 
最大发射功率：23dBm 
接收灵敏度：-94dBm 
DMX信号接口：RS485 
传输标准的DMX512控台数据，也可传输灯具与灯具间的联机数据 
126个频段自动跳频，自动选择无干扰频段，保障通讯的可靠性 
ID 码与 LED 颜色对应关系：
Introduction
The wireless DMX512 transceiver module is TOPTRON's original technology. It adopts 32-bit high-performance computing to transmit standard DMX512 data wirelessly, and can also transmit online data between lamps and lamps. This product completely solves the wireless transmission of data between the lighting console and the lamp, and between the lamp and the lamp, and completely removes the twisted pair cable that has been relied on for a long time. The proprietary technology overcomes the problems of transmission delay and serious packet loss of similar devices in the market, and achieves no delay in the process of data transmission, and the data is real-time and reliable! This product adopts 2.4G global open ISM frequency band, license-free use. Efficient GFSK modulation, 126-channel automatic frequency hopping communication design, strong anti-interference ability. 
Features
Unique detachable antenna design
Proprietary technology overcomes the problems of transmission delay and serious packet loss of similar devices in the market. Large link budget, stable and reliable communication
Three primary color LEDs display working status and parameters, one-key operation, no delay in transmission, integrated transceiver, automatic switching
7 groups of ID codes can be set, users can use 7 groups of independent wireless networks in one place without interfering with each other
Input voltage 5V DC Current 500mA
Communication distance: 600 meters (in an open space, it may vary depending on the environment)
Working frequency band: 2.4G; ISM, 126 frequency bands
Maximum transmit power: 23dBm
Receive sensitivity: -94dBm
DMX signal interface: RS485
It can transmit standard DMX512 console data, and can also transmit the connection data between lamps and lamps.
Automatic frequency hopping of 126 frequency bands, automatic selection of non-interference frequency bands to ensure the reliability of communication
The corresponding relationship between ID code and LED color:
1：RED---------------------------红 
2：GREEN-------------------------绿 
3：RED+GREED---------------------黄 
4：BLUE--------------------------兰 
5：RED+BLUE----------------------紫 
6：GREED+BLUE--------------------青 
7：RED+GREED+BLUE----------------白 
操作说明：

设备配置非常简单，设备首先上电，按右图所示进行操作。 

ID编码- - - -“1-7”组ID编码，按”KEY”调节，只有ID码相同的收发板才能相互通讯按一下按键显示当前的设置，再按进行设置，每按一下数值加1，设置完成后设备自动保存当前配置。 

工作状态： 

LED常亮：没有DMX或无线信号 
红色LED闪动：发送 
绿色LED闪动：接收

Instructions:

The device configuration is very simple, the device is powered on first, and operate as shown on the right.

ID code – – – -“1-7” group ID code, press “KEY” to adjust, only the transceiver boards with the same ID code can communicate with each other. Press the button to display the current setting, press the button again to set, and the value increases by 1 each time it is pressed. , the device automatically saves the current configuration after the setting is completed.

Working status: