Artnet-Pixel (spi/dmx) led controller offline stand-along player Madrix effects record 6612-pro  support 12X1024 pixels with sd card and suppor dmx512 console

https://youtu.be/1IK6Y-DeyOw

https://youtu.be/hoZYYA4qDss

https://youtu.be/g6gfpFrt4Os

6612 Pro work with online software madrix to record effect and play  online  

6612 Pro real-time preview + recording with madrix , see detailed  tutorial as follow please

https://mp.weixin.qq.com/s/5cZ51AW77TURiphyahDx6g

https://www.rose-lighting.com/6612pro-en-2/

the offline sofware Programming shadowdraw led software for 6612 pro 

https://www.rose-lighting.com/shadowdraw_v6-46_en-setep/

http://www.rose-lighting.com/wp-content/uploads/sites/53/2022/09/ShadowDraw_Setup_V6.26-2022.1.22.zip

https://youtu.be/j25dnFeRpCY

it has Automatically identify drawing map smartly to save much time 

https://youtu.be/1IK6Y-DeyOw

https://youtu.be/1bH1YQ1MMF0

Below is video of how to make mapping on our offline software ledforshow and import the mapping to madrix and make Live preview effect with madrix ,

6612 Pro 麦爵士实时预览调试同步录制Artnet拷卡播放512声光联动，

enjoy it please

https://youtu.be/OY-2vOTtJQc

Download the record tooling here please if you need to recard the madrix effect to sd card ,

http://www.rose-lighting.com/wp-content/uploads/sites/53/2022/03/artnet-record-tool.zip

The picture of 6612 pro

Introduction

Shadow-1-6612 is a single led controller of the off-line control system. It has 12 output ports, can control 122888 Pixels

Shadow-1-6612 can be connected to DMX console. Customer can adjust it via DMX console.

Shadow-1-6612 has 12  output ports, drives maximum 12288 pixels.

Three buttons and LCD screen are convenient for operation. Can be synchronized with AC power supply and connected to DMX console.
Shadow-1-6612 can drive the following chips: LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX, APA102, APA104, P9813, P9823, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, DZ2809, SM16716,  TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815, BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.

the  offline  software is “ ShadowDraw ”.

Notice: the maximum pixel number that each port can control only means the output ability of controller, whether actual signal can transmit to the end or not depends on the performance of lamp, EMI of switch power supply and the total interference of engineering field.

Features

(1). 12 output ports, controls maximum  12288pixels, each port controls maximum 1024 pixels.

(2).Offline SD card, single model controller, with sd card to play the programs inside.

SD card supports FAT32, FAT16 format; the maximum capacity is 64G bytes, stores up to 64 DAT files.

(3).Shadow-1-6612 can be connected to DMX console, you can replace file, and adjust speed and brightness by DMX console.

Can connect to DMX console, replace file, and adjust speed and brightness and responses quickly.

(4)FPGA, as the core processor, truly realizes high-load, high-speed, and high-gray control

(5)suport drawing lighting diagram wireless ( inkbook wifi inside the led controller)

(6)LED display, display parameters and address codes, and set address codes and parameters in combination with buttons

(7)Supports various types of lighting driver ICs: DMX512, UCS series, TM series, LX series, GW series, TLS series, MY series, etc. LED industry driver ICs

(8)The output interface can be compatible with differential signals and TLL signals at the same time

(9)Support RGBW four-color control and a variety of special control, RGBW can choose energy-saving mode and brightening mode

(10)Support true high gray scale control, up to 65536 gray scale control can be achieved, support gamma correction

(11)Support external console control, support access to private room intelligent central control, real-time control.

programming 12X1024 pixels Artnet-Pixel (spi/dmx) led controller support madrix to make Live preview.

Advantages:

Supported Driver Chips

LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX, APA102, APA104, P9813, P9823, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, WS2812, DZ2809, SM16716,  TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815, BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.

System Composition:

This led control system is composed of two parts:
1. YM-Shadow-1-6612 is a single led controller of the off-line control system. It has 12output ports, can control 12288pixel lights. Under our own software  Shadow Draw” our customers can realize many display effects, can play text, picture and video.

2.  Shadow Draw—Installed on computer, program display effects of lights and transfer data to SD card then to put in master controller to playback to led pixel lights. The software only support Windows OS, not support MAC.

Specification and Parameter:

Parameter

Power input:：AC 90-240V

Power comsumption :：3W

Input trigger interface：RJ45（DMX512）

Output interface:：12x3pin（DMX512）、12x2pin（TTL）

Output signal:：DMX512/TTL

working temperature:：-20℃～65℃

Product size:：L250×W175×H35 mm

Gross weight:：1 .3Kg

Port specification :

3pin：1 GND 2 DMX+ 3DMX-

2pin：1GND 2DATA

Application chart

外部触发指令，采用标准DMX512信号，可接入标准DMX512控台及KTV包房智能灯光控制盒。

External trigger description

External trigger command, using standard DMX512 signal, can be connected to standard DMX512 console and KTV private room intelligent lighting control box.

DMX512 trigger channel description (a total of 8 channels are used, the address code is set by the button)

 考卡说明

节目文件做好之后，全部COPY至SD卡即可。节目文件后缀名为rgb。

软件生成的文件名，不可修改。

建议拷卡之前，把SD卡先格式化一下。

sd  card description

After the program files are completed, COPY all to the SD card. The suffix of the program file is rgb.

The file name generated by the software cannot be modified.

It is recommended to format the SD card before copying the card.

Software is “ShadowDraw”when offline , madrix when online ,

https://www.rose-lighting.com/download

reply us the detailed user manual with shardow draw software and madrix

6612 Pro support  madrix to record effect to sd card when offline 

https://www.rose-lighting.com/products/6612-pro-work-with-madrix-to-record-effect-online-user-manual-with-video-and-picture/

More detailed user mnaul with picture and video ,please visit from our wechat blog please .

https://mp.weixin.qq.com/s/5cZ51AW77TURiphyahDx6g

There is detailed user manual for the 6612 pro please 

http://www.rose-lighting.com/wp-content/uploads/sites/53/2022/11/6612.pdf