8 port Artnet Led Strip Light Pixel Controller DMX Artnet Controller GC-6808-works with MADRIX or MADRIX compatible

GC6808 Artnet DMX Madrix Pixel led Controller with 8 port – 1020Pixels Per Universe -Support Artnet MADRIX Jinx!,Resolume,etc.

Advanatges
1). GC6808 8 port Artnet Madrix Pixel led Controller DMX Artnet Controller suppport 48universie supports Art-Net protocol, 8 ports, each port outputs max 6 universes.
2).Support Artnetsoftware-such MADRIX Jinx!,Resolume,etc
3). supports dozens of led chips, such as WS2812, WS2813, UCS1903, TM1914, sm16703 dmx512 etc
4). In online mode, GC6808 supports max 8160 pixels with 8 ports.
5)suppport cascade-more than 100pcs
6). support DMX512 ic address edit
look for details from rose light website please
https://www.rose-lighting.com/products/8-port-artnet-led-strip-light-madrix-pixel-controller-dmx-artnet-controller/
7).software: arnet software such as madrix or resolume arena-download here please
https://www.rose-lighting.com/download/

  • Description
  • Global Tab

8 port Artnet Led Strip Light Pixel Controller DMX Artnet Controller GC-6808-works with MADRIX or MADRIX compatible

worldwide ARTNET led controller with 8 ports GC-6808 A2-support 8 ports-one port support 1020 pixel

3port version now 

There is  RJ45 network connector optional 

details 

Advanatges
1). GC6808 8 port Artnet Madrix Pixel led Controller DMX Artnet Controller suppport 48universie supports Art-Net protocol, 8 ports, each port outputs max 6 universes.
2).Support Artnetsoftware-such MADRIX Jinx!,Resolume,etc
3). H802RA supports dozens of led chips, such as WS2812, WS2813, UCS1903, TM1914, sm16703 dmx512 etc
4). In online mode, GC6808 supports max 8160 pixels with 8 ports.
5)suppport cascade-more than 100pcs
6). support DMX512 ic address edit
look for details from rose light website please

8 port Artnet Led Strip Light Pixel Controller DMX Artnet Controller GC-6808-works with MADRIX or MADRIX compatible


7).software: arnet software such as madrix or resolume arena-download here please
https://www.rose-lighting.com/download/

GC-ARTNET is a light controller based on ART-NET protocol。Support international

standard ART-NET 3, and backward compatible with ART-NET, ART-NET 2。The controller

provides standard 8 sets of DMX512 output and 2 RJ45 network interfaces。GC-ARTNET

converts network packets into standard DMX512 signals and various SPI signals。GC-ARTNET adopts FPGA as the core processor and is equipped with gigabit network

transmission interface。The strong data computing ability of FPGA combined with the

transmission rate of gigabit network,Receive DMX512 packets from the network,And

extend the decoding output,Can support LED lighting market widely used single – wire,

dual – wire drive IC,Such as: TM1812, UCS2903, TLS3001 and so on。An output port

can also be extended to support 850 points。The output electrical standard includes

RS485 and TTL。

GC-Artnet provides a one-button parameter setting tool,Can quickly set the IP

address, Port address and other system parameters。The system can support various

ART-NET lighting application software at home and abroad, with the use of software,

widely used in stage, bar, KTV, TV recording hall, all kinds of theme exhibition hall

and all kinds of landscape lighting projects。

The performance characteristics

FPGA core processor, gigabit network transmission technology

Based on the international standard ART-NET 3 protocol, it can be backward compatible with

ART-NET and ART-NET 2 protocols

ART-NET network terminal network cable cascading, can use HUB branch parallel, can also be

a single network series

Support optical fiber, switch and other standard network equipment, to meet the needs of

various applications

Support ART-NET unicast and ART-NET broadcast mode

Data optimization and reorganization, provide 8 channels of data output, can support DMX512,

TTL, SPI and other lighting industry in all kinds of lighting signal types

Provide special parameter setting tools, one key set IP address, Port address and other system

parameters

Eight outputs, each can output 6 DMX fields, namely 1020 pixel points, support single-wire,

dual-wire driver IC, such as: WS2811,UCS2903, TM1812, TM1814,DMX512

Up to 16bit gray level dimming can be supported

With the use of software, various kinds of landscape lighting, 3D meteor, music

synchronization and other effects can be achievedSpecification

Power input: AC 90~240V

Power consumption: 5 W

Input signal: Artnet network package

Network interface: 1Gbps gigabit network (568B)

Output signal: DMX512, TTL, SPI

Output interface: 8 sets of 3 PIN terminals(①GND,②DA/D+,③D-)

Output port: 8 port

Output data: 8 x 1020 pixels

Operating temperature: -20℃-65℃

Product size: L234×W165×H42mm

Weight (gross weight) : 1.4kg

Instructions:

1、The cable pressing method must follow 568B pressing method: facing the copper sheet

side, from left to right: orange white, orange, green white, blue, blue white, green,

brown white, brown。

2、Computer to sub-control, sub-control to sub-control, network cable distance shall

not exceed 80 meters, in case of more than 80 meters, use gigabit switch or no-load

sub-controller as signal repeater。

3、Because the system uses full gigabit network, in order to ensure the communication

quality of the system, it is suggested to use pure copper network cable。

 

Download the english user manual here please

http://www.rose-lighting.com/wp-content/uploads/sites/53/2022/10/2022ART-NET-6808-A2-English.pdf

Below is the setting tooling to work with madrix

http://www.rose-lighting.com/wp-content/uploads/sites/53/2022/10/setting-tool-work-with-madrix.rar

 

GC-6808是基于Artnet 协议的灯光控制器,支持Artnet3.0、支持ArtSync packets,提供8个输出端口,

可以驱动DMX512/SPI灯具,SPI灯具类型包括TM1812、TM1814、TM1914、ucs2903、ucs9812、ws2811等行业内主流驱动IC。兼容标准DMX512标准,

同时可以扩展DMX512 应用,如:带载数量、波特率修改。GC-6808同时支持gc-net协议,可以和极彩科技其他脱机主控器、联机系统配套使用。

Gico net是极彩科技基于UDP的灯光控制协议,具有效率高、稳定等特点。

     GC-6808采用FPGA为处理核心,搭配2片千兆以太网芯片,内置大容量运算存储器,

实现高刷新、高辉度、高负载的性能。同时支持8个端口输出,每个端口可以输出1024像素。内置数据处理算法,保证图像数据的完整性、及时性。

    GC-6808 有红外接收装置,用户可以通过红外遥控器,方便的调整、设置系统参数,如:IP地址、端口地址、DMX512写址等等。用户也可以通过artnet tool设定artnet参数。

      产品通用性好,可以和其他标准ARTNET主控器、软件兼容使用,输出端口,软件可以设定输出电气格式,TTL或RS485.

                                          undefined

1. 产品特色

*  FPGA核心处理器,千兆网络传输技术 (不再支持10M、100M网络)

*  遵守 Artnet 3.0标准协议,支持Artnet4.0同步帧(ArtSync packets)

*  提供2个千兆网络接口,支持标准网络交换设备、光纤收发器接入,实现并行、串行两种网络架构

*  网络接口自适应输入/输出,无需区分,即插即用

*  支持ART-NET单播方式及ART-NET广播方式

*  8个输出端口,每个端口最大支持1024像素,每个端口支持6个DMX512 域(universe)

*  软件设定输出端口电气标准RS485或TTL,支持DMX512、SPI灯具类型

*  遵守标准DMX512(1990)协议,支持DMX512扩展协议,支持自定义DMX512参数

*  可以采用红外遥控器,设置控制器基本参数、测试功能等

*  支持16bit高灰度应用

2. 规格参数

   电源输入     :AC 90-240V

   功耗            :5W

   网络接口     : 2个 RJ45(568B)

   网络类型     : 1000M(不支持10M、100M)

   输出端口      :  8 口

   端口类型     : 3pin 插拔端子(5.08mm)

   控制点/端口: 1024点

   DMX512 域: 6个域(universe)

   工作温度     :-20℃~65℃

   尺寸            :L236×W165×H42 mm

   重量 (毛重)  :1.4 Kg

 3. 尺寸图

                           undefined

 

4. 接线说明

                            undefined

 

                                             undefined

                  说明:

                          1. 网口A、B不作区分,自适应输入输出。

                          2. 网线压法必须遵循568B压法:面向铜片一面,从左往右:橙白、橙、绿白、蓝、蓝白、

                              绿、棕白、棕

                          3. 电脑(或主控)到分控,分控到分控,网线采用CAT-5E或以上标准,网线距离不得超过80米,

                              如有超过80米的情况用千兆交换机或者空载分控器作为信号中继器。

5. 应用系统架构

          undefined
undefined

 

   并联模式

                     这种模式需要给每台分控设定IP地址。

                      undefined

 

   串联模式

                     undefined