Built-in breakpoint resumable transmission
1.The control circuit and the RGB chip are integrated in a 5050 packaged component to form a complete external control pixel.
2.The 12V power supply voltage effectively reduces the working current of the entire pixel, and reduces the voltage drop of the circuit board to the maximum.Ensure that the pixels achieve good mixing consistency during a long-distance transmission.
3.Built-in signal shaping circuit, any pixel point receives the signal after waveform shaping and then output, to ensure that the line waveform distortion will not accumulate.
4.The three primary colors of each pixel can achieve 256 levels of brightness display, and complete the full true color display of 16,777,216 colors.
5.Port scanning frequency 2KHz/s.
6.The serial cascade interface, can receive and decode data through a signal line.
7.Breakpoint continuation ,adding a new signal line to realize dual-channel signal transmission. When a single pixel is damaged, the overall display effect will not be affected.
8.When the transmission distance between any two points is less than 5 meters, there is no need to add any circuit.
9.When the refresh rate is 30 frames per second, the number of cascades is not less than 1024 points.
10.The data transmission speed can reach 800Kbps.
11.The color of the light is highly consistent and cost-effective.
LED WS2818B full-color breakpoint resumable transmission symphony marquee strip
Easy to install , energy saving, long life, many display patterns, which can control the display pattern of each lamp bead. The difference from the same product is single-channel control. Conventional symphony color marquee strips can only be changed in a group of three lights.
2.Function brief :
Control the various pattern change ,such as single light horse racing, running water, window opening, shooting star rear-end, chase ,and so on.
3.Describtion of strips:
The light source of this series of products adopts high-quality ultra-high-brightness LED, which has high brightness, low power consumption, good consistency, large angle, no radiation, strong environmental adaptability, and long service life. Every 3 LED lights can form a loop (pixels), which has light volume, rich pattern colors, arbitrary fixation, easy installation and other characteristics.
The light source of this product is rich in color, high visibility, and more visually attractive. It is widely used in wall corridors, indoor environment decoration, entertainment venues, wine cabinets, bar backlights, ceiling backlights, LED light box light sources, LED luminous signs, aquarium products, car decorations, etc. It is a new generation of lighting sources to replace the tradition neon led strip, fluorescent lights and tubes.
LED full-color led strip 5050RGB IC WS2818 breakpoint resumable transmission LED strip
The low-voltage light strip is safe and reliable. The WS2818 full-color light strip does not need to worry about the light strip being broken, and a single broken point will not affect the use of other lamp beads. The refresh rate of WS2818 is up to 300,and all effects can be easily realized on a small single-chip microcomputer .WS2818 full-color light strip is based on WS2813,and its functions are fully upgraded and recognized.