Narrow 5mm pcb WS2811/WS2812B/SK6812  5050  Addressable LED Strip 60pixels/m

  • Description
  • Global Tab

Narrow 5mm pcb WS2811/WS2812B/SK6812  5050  Addressable LED Strip 60pixels/m

 

Describe:

– Control IC included, supporting numerous Color-change effects;
– Pcontrol by SD controller,Arduino,DMX512,Artnet;
– Flexible PCB 5V low voltage input;
– 60pixels  per meter;
– Absolutely addressable ,each IC built inside RGB LED;
– 5M per roll,also Customer’s length available;

SK6812 5020 lamp is a mini type of  IC Built-in lamp

-the capacitance built-in lamp too,

-there is three line , Date and Clock together on one lines

Specification

ItemRL-STR-sk6812-5050RGB-60-5V
LED Quantity60leds/m
PCB thickness5mm width,2 ounce copper( 35um thinkness) 3ounce /4ounce optional
PCB ColorWhite PCB ,Black PCB
IC typeSK6812 5050 (IC Built into 5050)
Pixel Pitch 16.67mm with 60leds/m
IP RatingIP20/IP65/IP67/Ip68
Connector2PIN / 3PIN JST-SM connector
Control Modelindividually address to control
ControllerT1000s/K1000c/T-500K/Arduino/Glediator/DMX/Artnet/Raspberry
Product Keywordssmd5050 60 leds ws2812b led strip,sk6812 smd5050 60leds, 5mm led strip ;sk6812 5mm pixel led strip
Advantages

1. So thin. So mini. So teeeeeeny-tiny. It’s the ‘skinny’ version of our classic digital Pixel strips that different with the standard 5050 led pixel stirps.

2. These sk6812mini skinny SMD 5050  digital Pixel strip is 60 digitally-addressable pixel Mini LEDs per meter and are very affordable and are only 7.5 mm wide, 5 mm bare flexible board if you remove the strip from the casing. Strips are available with black and white flex PCB.

3.  There are 60 RGB sk6812 mini 5050 LEDs per meter on sell too, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).

4.  The 5mm width mini skinny 5050 led digital strip 60led/m is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.66″/17mm (1 LED each). Solder to the 0.1″ copper pads and you’re good to go. Of course, you can also connect strips together to make them longer.

5. If 5mm width mini skinny 5050 led digital strip 60led/m does get damaged, it is often one led copper unit broken, in such case,

cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

6. Please note, do not power than DC6V input, if that will destory entire led strips.

Waterproof Rate:

  • IP20 Non-waterproof with 3M sticker on the back
  • IP65 waterproof is silicone gel on the surface
  • IP67: silicone tube/coating
  • IP68: silcone gel(or epoxy) inside silicone tube.

Connection guide

SPI signal: LED Strip+LED power supply +LED controller

DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder

LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.

(offline / PC online)

LED power suppply: power supply, T- series, A- series power supply…(waterproof / non-waterproof)

Video show 

Picture details:

 

s shape flexible Pixel  led strip 

Video show

Online Service
Live Chat