Narrow 5mm pcb WS2811/WS2812B/SK6812 Mini 3535 Addressable LED Strip

  • Description
  • Global Tab

Narrow 5mm pcb WS2811/WS2812B/SK6812 Mini 3535 Addressable LED Strip


– Control IC included, supporting numerous Color-change effects;
– Pcontrol by SD controller,Arduino,DMX512,Artnet;
– Flexible PCB 5V low voltage input;
– 30pixels  60 pixels  144 pixels per meter all available ;
– Absolutely addressable ,each IC built inside RGB LED;
– 5M per roll,also Customer’s length available;

SK6812 3535 lamp is a mini type of Built-in lamp
he is three line , Date and Clock together on one lines


product name5mm width sk6812mini skinny 3535 rgb digital led strip
LED Quantity30leds/m   60 LEDs/m   72leds/m   96led/m  144leds/m
PCB thickness5mm width,3 ounce copper( 35um thinkness) 2ounce optional
PCB ColorWhite PCB ,Black PCB
IC typeSK6812 mini 3535 (IC Built into 3535)
Pixel Pitch 33.33mm with  30leds/m      16.67mm with 60leds/m   6.69mm with 144leds/m
IP RatingIP20/IP65/IP67/Ip68
Connector2PIN / 3PIN JST-SM connector
Control Modelindividually address to control
Product Keywordssmd3535 60 leds ws2812b led strip,sk6812 smd3535 60leds,mini smd3535 5mm led strip ;sk6812 5mm pixel led strip

1. So thin. So mini. So teeeeeeny-tiny. It’s the ‘skinny’ version of our classic digital Pixel strips that different with the standard 5050 led pixel stirps. LED size is only 35x35mm.

2. These sk6812mini skinny SMD3535 digital Pixel strip is 60 digitally-addressable pixel Mini LEDs per meter and are very affordable and are only 7.5 mm wide, 5 mm bare flexible board if you remove the strip from the casing. Strips are available with black and white flex PCB.

3.  There are 30 and 144 RGB sk6812 mini 3535 LEDs per meter on sell too, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel).

4.  The 5mm width mini skinny 3535 led digital strip 60led/m is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this stuff pretty easily with wire cutters, there are cut-lines every 0.66″/17mm (1 LED each). Solder to the 0.1″ copper pads and you’re good to go. Of course, you can also connect strips together to make them longer.

5. If 5mm width mini skinny 3535 led digital strip 60led/m does get damaged, it is often one led copper unit broken, in such case, cutting of this copper unit segment and resoldering the rest copper units together brings the strip back to life.

6. Please note, do not power than DC6V input, if that will destory entire led strips.

Waterproof Rate:

  • IP20 Non-waterproof with 3M sticker on the back
  • IP65 waterproof is silicone gel on the surface
  • IP67: silicone tube/coating
  • IP68: silcone gel(or epoxy) inside silicone tube.

Connection guide

SPI signal: LED Strip+LED power supply +LED controller

DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder

LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.

(offline / PC online)

LED power suppply: power supply, T- series, A- series power supply…(waterproof / non-waterproof)

Picture details:

Video show