Digital LED Strip with loop circuit 60Led 60pixels ws2811Dc5V

Application:

1. Architectural decorative lighting and backlighting for homes, hotels, marketplaces, bars etc;

 2. Auditorium walkway lighting, outdoor illuminated signs and advertisements;
 3. Illumination lighting using business walkway, canopy, stairway lighting, amusement park;
 4. Channel signal lighting for stores, restaurants, bars, etc;
 5. DIY lights for home use;
more deyails ,please contact at [email protected]
Category:

  • Description
  • Global Tab

Digital LED Strip 60Led 60pixels ws2811Dc5V with loop circuit

New pixel led strip 60pixels/m.
input and output on same side..
it make signal go in series well and power on well from one side only..
and it save much time in installing..

Introduction

Led type: 5050 SMD RGB LED
IC type: ws2812/sk6812
PCB Width:10mm
Led lighting angle: 120°
LED Q’ty:  60led/m ; 60Pixels/m

with loop circuit to make 4pin cable

GND:  Black  Dc5V : Red   Data :  Green  W(loop curcuit): Blue 

IP Rating IP20, IP65, IP67, IP68.

  • IP20 Non-waterproof with 3M sticker on the back,
  • IP65 waterproof is silicone gel or epoxy on the surface,
  • IP67: silicone tube,(silicone sheathing ),
  • IP68: silcone gel(or epoxy) inside silicone tube.

Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages:

1.PWM refresh rate: 800kHz, transfer speed 800k bps.

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3. each led individually addressable,each led can be cut .

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever 1 LEDcan be cut,cutting unit :16.67mm

7. 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .

8. Controller System:SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Product details

 

Video show 

https://www.youtube.com/watch?v=2hdAFDHiIfA

https://www.youtube.com/watch?v=-QWNCL3IYkg

https://www.youtube.com/watch?v=BIPzord11Wo