DC5V  Individually Addressable sk9822A 5050 RGB  LED Strip 30leds 60leds 72leds 144leds /M 27K HZ PWM refersh rate and 30M HZ transfer speed

Category:

  • Description
  • Global Tab

DC5V  Individually Addressable sk9822A 5050 RGB  LED Strip 30leds 60leds  72leds 144leds /M 27K HZ PWM refersh rate and 30M HZ transfer speed

Key specification

Fastest pixel  rgb  LED Strip
Led type:5050 SMD LED
IC type: sk9822A
PCB Width:10mm/12mm optional
Led lighting angle: 120°
LED Qty: 30leds/m, 60leds/m,  144leds/m
IP Rating IP20, IP65, IP67, IP68.
Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages

  • CLK+Data double wire transfer.
  • PWM refresh rate can be +27kHz
  • Max transfer speed is 30M bps 
  • one roll(10meters)can be powered with one power input without color difference,
  • Pure copper bracket and 99.99% Gold wire for sk9822A Pixel LED chip
  • 256 Gray scale(8bits)
  • 2 sides membrane cover the PFCB.Make sure the copper no drop from the pcb board
  • It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
  • 30leds/m, 60leds/m,  144leds/m . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .
  • Hongqi brand 2OZ FPCB(35um cooper)with double cooper layer,
  • sk9822A  led strip with double signal ,one pixel borken ,no affect the next one working
  • sk982A  with Date Rate 30MHZ( Oscillator Frequency)
  • sk9822A  LED with less voltage drop and one roll(5meters)can be powered with one power input without color difference, so the 5m long voltage drop problem is solved,
  • The sk9822A  is low consumptionand high energy saving ( with Built-in dormancy Mode inside )
  • Thesk9822A led lights up looks like linear lighting ,large lighting beam

Installing :

non-waterproof: with 3M adhesive on back side for sticky; waterproof: screw+silicon clip, or 3M adhesive back side.

Controller system:

1.Offline controllers, online controller work with computer,Such as LEDedit,
2.DMX console ,
3.Madrix software & map and any other artnet software.
4.Also the singlechip,such as the Arduino.
Waterproof  Type 

IP20 non waterproof:3M sticker on the back, easy installation.
IP65 waterproof: Silcone gel or epoxy on the surface,3M sticker on the back.
IP67 waterproof: Silicone tube, equipped with card buckle and screw.
IP68 waterproof: Silicone gel or epoxy inside silicone tube,equipped with card buckle and screw.

Applications:

Widely used for decoration use, KTV, hotels, clubs, shopping malls,night bar, disco
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Backlighting, concealed lighting, channel letter lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting

Diemension

 

download the technical specification for sk9822A led here please

https://www.rose-lighting.com/wp-content/uploads/sites/53/2020/05/SK9822-A-REV.01-EN-5050-RGB-27K-HZ-PWM-30M-bps-speed.pdf

All kinds of Pixel LED chip difference as follow

Chipsettype = LEDTYPE.DATA (R6)CLK (R7)Color BitsData RatePWM Rate
apa102C(fake apap102)apa012C820Mbps20kHz
WS2801WS280181Mbps2.5kHz
WS2812/ws2811WS2812/ws28118800kbps800Hz
SK9822ASK9822A830Mbps27kHz
APA107APA107830Mbps9kHz
HD107SHD107S830Mbps27khz
APA102(original type)APA102820Mbps20khz
GS8208GS820812800kbps6kHz
TM1804/ucs2904TM1804/ucs29048800kbps800Hz
UCS1903UCS19038800kbps800HZ
P9813P981381-15Mbps4.5kHz
sk6812sk68128800k bps800 HZ
ws2815ws281518800kbps800Hz

video show

 

 

Online Service
Live Chat