12V 120leds two rows 20pixels 20mm width Digital Pixel LED Strip ws2811/ucs2903

https://www.youtube.com/watch?v=6SMBRz8JioE

https://m.facebook.com/story.php?story_fbid=2786672438245431&id=100007081054890

Describe:

• Digital 12V  LED Strip
• Item: RL-STR-ws2811-5050RGB-120–20P-12V
• IC Type:ws2811
• Color:Digital RGB
• LED Quantity: 120 leds per meter
• Size: 5000*20*2.5(mm) 
• View angle:120°
• Working Input Voltage: 12V
• Drive Mode:Constant Voltage
• Pixels/M :20pixels

Advantages

1.PWM refresh rate: 800kHz, transfer speed 800k bps

2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3. Pure copper bracket and pure gold wire for 5050 RGB led chip

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. 120leds and 20pixels per meter ,One IC control six leds ,

7. 12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

waterproof Type

IP20 Non-waterproof with 3M sticker on the back, Size:5000*20*2.5mm

IP65 waterproof is silicone gel on the surface,Size:5000*20*3mm

IP67: silicone tube,Size:5000*22*4mm

IP68: silcone gel inside silicone tube.Size:5000*22*4mm

Product details

Video show