High brightness 3535 RGB flex led strip Dc24V 240led/M with 12mm width

 High brightness 3535 RGB flex led strip Dc24V 240led/M with 12mm width

•3535 RGB Flexible LED Strip

•Color: RGB

•LED Quantity: 240 leds/Meter

•Size: L500cm (5M)

•View angle:120°

•Working Input Voltage: 24VDC 48W/M

•Working Tempreture:-20° to 50°

•Drive Mode:Contant Voltage Dc24V


  • Description
  • Global Tab

High brightness 3535 RGB flex led strip Dc24V 240led/M with 12mm width

Model : RL-STR-3535RGB-240-24V-12mm


This is a PWM control RGB color LED strip without Pixel
SMD RGB 3535 LEDs ,

5meters/reel, 12mm PCB width
The cutting unit length is  100mm(24V) per section
The PCB is made by 2 Ounce thick copper 35um
All soldering Pads are very large, allowing you to easily cut and reconnect
DC24V constant voltage operation
Both ends have 4pin bare wires for powering
3M tape attached on backside of FPC
4 different waterproof types IP22, IP65, IP67,Ip68


•Widely used for home decoration use, hotels, clubs, shopping malls

•Architectural decorative lighting, boutique atmosphere lighting

•Extensively applied in background lighting, concealed lighting, channel letter lighting

•Emergency & security lighting, advertisement sign lighting

•Decorative lights for holiday, event, show exhibition

•Applicable for automobile and bicycle decoration, border or contour lighting


•Superbright 3535 SMD top LED, high intensity and reliability.

•Long life span 50,000+ hours

•Cuttable every 6 LEDs along the cutting marks, according to pratical requirement.

•Flexible ribbon for curving around bends

•Low power consumption

.Installing : non-waterproof: with 3M adhesive on back side for sticky; waterproof: screw+silicon clip, or 3M adhesive back side.



waterproof Type

Ip22 with nonwaterproof for indoor use

IP65 with silcome glue add 0.5USD per meter .
IP67 with silcone tube add usd 0.5 per meter .
IP68 with injectioned silcione gel add 1.0 USD per meter


Do not use any acidic, alkaline adhesive fixing Product

It is prohibited to make products with a hard object collision,
Do not use your fingers to press LED
Don’t make positive and negative reversed
Don’t install when product is working
Installation, repair and maintenance must be made by
professional Person
Before you use them make sure the power supply voltage
to meet the requirements and wire connection correctly

Picture details







Connection diagram

Video show