Digital ws2812 sk6812 rigid  Pixel led bar 30Led 30pixels Dc5V with loop circuit(signal input and signal output on same side)

  • Description
  • Global Tab

Digital ws2812 sk6812 rigid  Pixel led bar 30Led 30pixels Dc5V with loop circuit(signal input and signal output on same side)

Introduction

Led type: 5050 SMD RGB LED
IC type: sk6812/ws2812
PCB Width:10mm
Led lighting angle: 120°
LED Q’ty:  30led/m ; 30Pixels/m

4pin : GND  DI  +5V  DOUT

Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages:

1.PWM refresh rate: 800kHz, transfer speed 800k bps.

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3. each led individually addressable,each led can be cut .

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever 1 LEDcan be cut,cutting unit :33.33mm

7. 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .

8. Controller System:SD controller , DMX controller , Artnet and so on .(SPI protocel)

Product details

Video show 

 

 

 

 

 

 

Online Service
Live Chat