DC5V 9mm WS2811 led pixel node,with clear/ colorful/black wire optional (20AWG),IP67rated Dc12V optional

  • Description
  • Global Tab
DC5V 9mm WS2811 led pixel node,with clear/ colorful/black wire optional (20AWG),IP67rated Dc12V optional



Working voltage:            DC5V   Dc12V optional 

Working current:             60ma

Working consumption:     0.3W
Working temperature:    40°C- 60

IP grade:                       IP67

Dimension:                    9mm

LED type:                       1pcs  F5 stawhat

LED qty:                        1pcs
Lifespan:                        MTBF>50000h

Viewing angle:                >90

ICt Type: ws2811  TM1914  dmx512 ,ect  optional


RGB Pixels are digitally-controllable lights you can set to any color, or animate

Each RGB LED and controller chip is molded into a ‘dot’ of silicone.

The dots are waterproof and rugged.

There are four flanges molded in so that you can ‘push’ them

into a 9mm drill hole in any material up to 1.5mm/0.06″ thick

They are typically used to make outdoor signs. Compared to our other 20mm LED dots

these are diffused 8mm LEDs so they are not as bright but they color mix a little nicer.

The pixels are connected by a 3-conductor cable. Red is +5V, Yellow is Ground, Green is Data and

Data is shifted down from one pixel to the next so that you can easily

cut the strand or attach more onto the end.

Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15-bit color for 32,768 different shades). The pixels must be clocked by a microcontroller

The pixels use 8mm diffused RGB LEDs

with brightness of about 300 mcd per individual r/g/b LED.

SD controller
Programable by Software
Individually Control
Conformal Coating,PVC glue protection
IP68, Water-proof protection
Easy installation (punching 12mm hole on metal panel)
100pcs per set


Meets the general lighting
environment such as:
Outdoor advertising
christmas decoration


50pcs per string , 500pcs per bag , 5000pcs per cartoon ,cartoon size: 48cmX48cmX28cm  GW:25kg