3D rectangular Pixel led ball 30mmX15mm

  • Description
  • Global Tab

Technical Parameters for 3D rectangular Pixel led ball 30mmX15mm

Part NORL-3015-3D
Lighting Source2pcs SMD3535 RGB LED
Beam Angel360 degree
Operate VoltageDC12V
Consumption Watt/M0.48Watt (max)
size (mm)35mm X15mm
Chain20pcs/Chain
IC chipUCS1903 full color
CoverClear
Waterproof GradeIP67
Lifetime50000H
Working temperature-20℃-60℃
Storage temperature-30℃-80℃

Product Features

1. Individually control: 1 pcs led pixel light & 1IC (1903/2811).SPI Protocol: ucs1903 IC control,Each can be addressable individually.
2. Color and effect: addressable lights you can set to any color, or animate, like running water, chasing and scanning etc.
3. Combination: PVC shell (thermostability, cold-resistant, resistant to UV) and PCB board, connector cables.
4. Waterproof IP67, with silicon glue waterproof protection.

5. Clear lens cover housing, 20 pcs/string, 10cm length between 2 led lights,
6. With features of high brightness, low power dissipation, long lifespan, low Voltage, low decline, colorful.
7. Power supply should use a 12V DC power supply to power this pixel, do not use higher than 13V or it will burn the pixel.
8. Connectors: 4IN JST female and male connectors, also can be waterproof connectors, DAT, DC12V+, GND.2- 2pcs SMD3535 RGB LEDs inside of one light;
9.UCS1903 ic chip, but 4pin signal transfer;
10.- Double sides lighting design,360 degree viewing

11.Easy installation,convenient maintenance,reliable and safety with low voltage input

12.Application place: Night club,disco, staging light,and event etc.

3D led pixel point light ball lighting effect

Color and effect: addressable lights you can set to any color or animate, like running water,chasing and scanning etc.

depending on the different installation methods may compose different dynamic effect of different color’s character and design

Outline Dimension

Controller System

1. SD Controller T400K, T500K, T4000C, K1000C, K8000C; Online Controller; Artnet;Arduino and DMX controller.
2. Software to make program, now we often use LEDEDIT, LED EASY and MADRIX.
3.Contact me for more information.
Normal Controller

.Connection

1. Signal wire:DC+, DAT, GND.
2. DC+ and GND connect to power supplier; DAT, CLK and GND connect to controller.
3. Relative Controller: SPI controller, DMX controller .
4. SPI Signal:LED pixels + LED Power Supply + LED Controller.
5. DMX Control:LED pixels + LED Power Supply + DMX Controller + DMX Decoder.
6. LED Power Supply:meanwell power supply or some other qualitified power supply (waterproof/non- waterproof).

3D led pixel ball

 3D led pixel ball

Video show

Online Service
Live Chat