- Description
- Global Tab
Dc12V dmx512 SM18512pk chipset 5050 RGB Pixel led strip with 12mm width
Our DMX flexible led strip is super strong dmx signal strip with A,B signal parallel signal transfer. 5 cables ( PI/PO address writing wire, A(Dmx+),B(Dmx-),GND),
and DC12V,the MAX485 is inside the DMX512 IC ,It can be cut ,can be parallel and series connection .
Product details
Product Name | RL-STR-dmx512-5050-34P-12V |
LED Qty | 34leds/m |
DMX512 Qty | 34 pcs with 12V |
DMX channel | 102channels with 12V |
PCB Width | 12mm wide |
Voltage | Dc12V |
Watt | 14.4W |
PCB Color | Black/white PCB |
IP Rating | IP20/IP65/IP67/IP68 |
Controller | DMX512 Art-Net/DVI/DMX Controller |
Product Keywords | sm18512p dmx512 led strip |
key specification
1. This 12V flex dmx digital led strip 34leds/M ,that different with normal SPI led pixel strips. DMX512 led strips protocl is DMX512 that signal is parallel not series.
2. Its advantage is parallel DMX512 signal could avoid LEDs color influenced by the failure of one light in serial connection.
2. Entire DMX RGB digital led strip has 16pixels with 12V , 34 pcs RGB leds in a meter with 12mm width pcb board.
3. Communication between DMX512 RGB led digital tapes are synchronized perfectly under support of Artnet / DMX512 led controllers.
4. 12V 34 leds DMX RGB LED Pixel Digital strip need to write DMX address code via DMX address coder / controller.
5. Vivid lighting performance operated by Madrix software, Artnet / DMX512 led controllers.
6. 12V 34 leds DMX RGB LED Pixel Digital ribbon is flexible , bright, durable and easy for installation.
For bare board strip, you can use the 3M adhensive tape on back; For waterproof silicone tube strip,
there shipped with flexible silicon brackets and screws, the brackets fit over the waterproof sheath, it would be used to mount the led strips very well.
7,each led is individually addressable , 34pixels per meter ,one ic control one led , in total 102 channels per meter ,
take noted to take care of Thermal treatment for the DC12V 34pixels dmx512 led stirp ,bec many Electronic Component on the pcb boards .
Advantages:
- 2unce PCB board with double cooper layer(hongqi brand 35um copper )
- doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board
- It comes in 1 meters per reel with 5Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
- Flexible PCB material . ever 1LEDcan be cut with 12V;
- 34LEDs/M with 12V . 12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .
- warranty: 3years
- Original SM18512P with standard dmx512 signal ,
Installing : screw+silicon clipand 3M adhesive on back side for sticky
Packaging
5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm GW: 12.5kg with nonwaterproof Ip20
Waterproof IP grade
IP20 Non-waterproof with 3M sticker on the back, Size:5000*12*2.5mm
IP65 waterproof is silicone gel or epoxy on the surface,Size:5000*12*3mm
IP67: silicone tube,Size:5000*14*4mm
IP68: silcone gel(or epoxy) inside silicone tube.Size:5000*14*4mm
Datasheet of the dmx512 IC chipset: sm18512P
http://www.rose-lighting.com/wp-content/uploads/sites/53/2023/02/SM18512P_IBTOZIV1.01.pdf
Detailed picture and video
One ic control one led
https://youtu.be/eM1Cayy6vzg
https://youtu.be/Mfum2Vy1PeY