25mm diamter 3D led pixel ball DC12V ws2811 SM16706 SPI control dmx512 type optional

25mm 3d led pixel ball

1- This is one new mini 3D string light, the colour is changeable full colour;
2- 2pcs SMD3535 RGB LEDs inside of one light;
3- SM16703 ic chip, but 4pin signal transfer;
4- Normal length per string is 2.5m/ 20 lights per string.
5- SPI Protocol: ucs1903 IC control,Each can be addressable individually.

6- Double sides lighting design,360 degree viewing

7-Easy installation,convenient maintenance,reliable and safety with low voltage input

8- Application place: Night club,disco, staging light,and event etc.

3D led pixel point light ball lighting effect

Color and effect: addressable lights you can set to any color or animate, like running water,chasing and scanning etc.

depending on the different installation methods may compose different dynamic effect of different color’s character and design

this Type can be used indoor only! (30mm25mm  LXW)

23mm 3D Pixel led ball optional

35mm diamter 3D Pixel led ball optional

clear cable and black cable optional 

Controller System

1. SD Controller T400K, T500K, T4000C, K1000C, K8000C; Online Controller; Artnet;Arduino and DMX controller.
2. Software to make program, now we often use LEDEDIT, LED EASY and MADRIX.
3.Contact me for more information.
Normal Controller

.Connection

1. Signal wire:DC+, DAT, GND.
2. DC+ and GND connect to power supplier; DAT, CLK and GND connect to controller.
3. Relative Controller: SPI controller, DMX controller .
4. SPI Signal:LED pixels + LED Power Supply + LED Controller.
5. DMX Control:LED pixels + LED Power Supply + DMX Controller + DMX Decoder.
6. LED Power Supply:meanwell power supply or some other qualitified power supply (waterproof/non- waterproof).

Video show

https://www.youtube.com/watch?v=azxqqVZ6dfA