Full color addressable SS1934A one channel Dc24V Pixel RGB 2835  LED Strip 8pixels/m 144leds/m with 8mm width

  • Description
  • Global Tab

Full color addressable SS1934A one channel Dc24V Pixel RGB 2835  LED Strip 8pixels/m 144leds/m with 8mm width

Describe:

– Control IC included, supporting numerous Color-change effects;
– Pcontrol by SD controller,Arduino,DMX512,Artnet;
– Flexible PCB 24V low voltage input;
– 144 white /RGB smd 2835 leds and 8 Pixels   per meter;
– Absolutely addressable ,each IC control 18 leds
– 5M per roll,also Customer’s length available;

-FW1934 support 3channels, support 2835RGB and 2835 white pixel led .

-there is four line , Date  and GND and DC24V+ 

Specification

ItemRL-STR-FW1934-2835RGB-8Pixel-144-24V
LED Quantity144leds/m
PCB thickness8mm width,2 ounce copper( 35um thinkness)
PCB ColorWhite PCB ,Black PCB
IC typeSS1934 (SPI protocel ,same work as ws2811,ws2815)
cutting unit 125mm
IP RatingIP20/IP65/IP67/Ip68
Connector4PIN JST-SM connector
Control ModelSPI control
ControllerT1000s/K1000c/T-500K/Arduino/Glediator/DMX/Artnet/Raspberry
Product Keywordsdual signal pixel led strip ;SS1934A pixel led tape
Advantages

1.  This is  one channel  24V pixel led strip ,  that different with the dual signal , one pixel no work , donot affect next pixels  working ,

2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.24V  working voltage  ( 6leds with one IC with 24V)

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . every 18 LEDcan be cut with 24V,

7.  120leds per meter  . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .

8. Controller System:SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Waterproof Rate:

  • IP20 Non-waterproof with 3M sticker on the back
  • IP65 waterproof is silicone gel on the surface
  • IP67: silicone tube/coating
  • IP68: silcone gel(or epoxy) inside silicone tube.

Connection guide

SPI signal: LED Strip+LED power supply +LED controller

DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder

LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.

(offline / PC online)

LED power suppply: power supply, T- series, A- series power supply…(waterproof / non-waterproof)

Real Picture 

There is RGB color optional 

24V  60led 10 pixels   white pcb and black pcb optional !

Black PCB (on the right ) 12v 60led 20 pixels  optional !