Dc24V Full color addressable 8mm width 1934 Pixel RGB 2835  LED Strip 20pixels/m 120leds/m

1)Brihtness >2100mcd 2835 RGB led lamp with copper bracket and gold wire
2) 2OZ pure copper PCB board with 8mm width -10meter long no voltage drop
3)Double membrance covering the FPCB board ,good protection,
4) Standard SPI protcel: 1934Ic chipset -dual signal .
5)cutting unit:every 6led (50mm),
7) Dc24V 14.4.W/meter (max),
8) LED density: 120pcs RGB 2835 LED per meter ,
9) controller system: artnet or offline or online led controller

  • Description
  • Global Tab

Dc24V Full color addressable 8mm width 1934 Pixel RGB 2835  LED Strip 20pixels/m 120leds/m

https://youtu.be/-euNFHKgVhI

Advantages:

1)Brihtness >2100mcd 2835 RGB led lamp with copper bracket and gold wire
2) 2OZ pure copper PCB board with 8mm width -10meter long no voltage drop
3)Double membrance covering the FPCB board ,good protection,
4) Standard SPI protcel: 1934Ic chipset -dual signal .
5)cutting unit:every 6led (50mm),
7) Dc24V 14.4.W/meter (max),
8) LED density: 120pcs RGB 2835 LED per meter ,
9) controller system: artnet or offline or online led controller

Describe:

– Control IC included, supporting numerous Color-change effects;
– Pcontrol by SD controller,Arduino,DMX512,Artnet;
– Flexible PCB 24V low voltage input;
– 120pcs RGB smd 2835 leds and 20 Pixels   per meter;
– Absolutely addressable ,each IC control 18 leds
– 5M per roll,also Customer’s length available;

-1934A  support 3channels, support 2835RGB led

-there is three line , Date  and GND and DC24V+ 

Specification

ItemRL-STR-1934-2835RGB-20P-120-24V
LED Quantity120leds/m
PCB thickness8mm width,2 ounce copper( 35um thinkness)
PCB ColorWhite PCB ,Black PCB
IC typeLB1934A (SPI protocel ,same work as ws2811,ws2815)
cutting unit 5cm
IP RatingIP20/IP65/IP67/Ip68
Connector3PIN JST-SM connector
Control ModelSPI control
ControllerT1000s/K1000c/H807SA/Arduino/Glediator/DMX/Artnet/Raspberry
Product Keywords1934A pixel led stirp ,2835 RGB led strip
Advantages

1.  This is   24V pixel led strip , very narrow and suit for neon flex led tube .

2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.24V  working voltage  ( 6leds with one IC with 24V)

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . every 18 LEDcan be cut with 24V,

7.  120leds per meter  . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .

8. Controller System:SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Waterproof Rate:

  • IP20 Non-waterproof with 3M sticker on the back
  • IP65 waterproof is silicone gel on the surface
  • IP67: silicone tube/coating
  • IP68: silcone gel(or epoxy) inside silicone tube.

Connection guide

SPI signal: LED Strip+LED power supply +LED controller

DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder

LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.

(offline / PC online)

LED power suppply: power supply, T- series, A- series power supply…(waterproof / non-waterproof)

Real Picture 

application