sk6813 12V pixel led bar light up the Large commercial center in shenzhen shopping mall

Address: Pengruida shipping mail in nanshan shenzhen  guangdong province china

This is a wonderful project. Client choose sk6813 daul signal led strips and we think it is point for this project.

Several control solution can be offered.And customer did not choose the cheapest one but more stable control system.I think that’s the choice most of us would make.

1.Led strip lighting 

DC12V  Dual signal  sk6813 5050  RGB pixel led strip 60pixels/m  ,one pixel broken ,no affect next pixel working!

Totally pixels quantities for this project is 100meter : 6000 pixels (RGB type)

Picture and detailed specification ,click below

https://www.rose-lighting.com/products/dc12v-individually-digital-full-color-5050-rgb-led-strip-sk6813-30-leds-60leds-120leds-144-leds-per-meter-optional-good-replacement-of-ws2815/

the sk6813  led strip  is  put inside  the following led aluminium profile 

2.Controller system :H803TC led master  and H801RC  led slave controller 

1)Brief  of led master H803TC 

H803TC Master Controller LED Online/Offline Pixel Lights Controller Drive 170000 Pixels Work With H802RA H801RC Slave Controller

Specification 

 H803TC can work with PC(online mode), SD card(offline mode) or DMX console. (2). H803TC drives maximum 170000 pixels, 2 ports control maximum 255 slave controllers. (3). Slave controllers include H802RA and H801RC. (4). You can set address for DMX512 chips with H803TC. (5). H803TC transmits data based on Ethernet Protocol. (6). Use four buttons or PC to switch files, set play mode, speed and brightness. (7). SD card supports FAT32, FAT16 format, maximum capacity is 64G bytes, stores up to 64 DAT files.

LED Build Software Download Link:

Download

LED Build Software Tutorial Video(especially for H803TC)

More details pls visit :

https://www.rose-lighting.com/products/led-artnet-controller16-universsupport-resolumemadrixjinx-marster-controller-h803tc/

2)LED slave controller H801RC 

H801RC  led slave controller

https://www.rose-lighting.com/products/h801rc-led-8-ports-controller-drive-max-8192-pixels-connect-to-pc-or-master-controller-rj45-port/

Features

(1). Eight ports controls maximum 8192 pixels. Each port controls maximum 1024 pixels.

(2). H801RC works online or offline, H801RC can be connected to PC or master controller.

(3). Good control effect, grayscale level is under precisely control.

(4). Far transmission distance. Signal transmitted based on standard Ethernet protocol, nominal transmission distance is 100 meters.

Specifications:

Input Voltage:

Customized Power Consumption: 1 W

Drive Pixels Number: 8192pixels

Weight: 1KG

Dimension: L189 x W123 x H40

Carton Size: L205 x W168 x H69

Supported Chips:

LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX, APA102, P9813, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, WS2812, DZ2809, SM16716, TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815, BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.

Note:

H801RC can support more than the chips listed above(for example UCS2903 has the same sequence diagram with UCS1903, H801RC supports them all).

Working Mode :

Mode 1: Connected to master controller(offline mode) Software: LED Build LED Build Download:

https://www.rose-lighting.com/download/

3)How to connect with them led stirp and led controller and led power 

 

 

4)software: Ledbuild when  offline   or ledstudio&madrix when online 

be our clients , you will be loved , there is free madrix 5.0 key with 2048 universies to work out your madrix lighting project

 

5)led power supply

There are  rainproof  led  power supply  model S-400-12V used for   project

Quantity:15 pcs which is  used for the project . details as follow

https://www.rose-lighting.com/products/rainproof-dc5v-dc12v-dc24v-400watt-led-power-supply-for-outdoor-project-use/

6) SPI led signal amplifier
take noted there is 5pcs SPI TTL signal amplified used in this project  ,
there is long distance from led to our led controller ,so need SPI signal amplifer 10pcs used for the project ,
click our webiste for details please

we did test for all led items always before shipment to make sure all work  well ,

There are right tutorial video of how to connect led strip to  led controller and led power supply 

related Project case with sk6813 pixel led strip

Rose lighting Dc12V sk6813 pixel led strip lights up the national Museum in beijing China.

 

About us 

Rose lighting focus on Led strip project product with competitive solution and engineering service since 2012 in shenzhen china,
main led strip series
-pixel led strip
-rgb led strip
-rgb cct led strip
-cob led strip
-neon flex led
-monochrome led strip
-led controller&led power supply
ect

Advantages as follow

-focused on manufactuering pixel lighting more than 8 years.

-competitive price and project solution service

– more than 100 project case each year

-all Types of led strip are available.

-skilled support team and engineering service

– visable all kinds of project case show and Exhibition board in our showroom

-OEM/ODM offered

enjoy more about our product and new project from our website .

https://www.facebook.com/roselightings

https://www.youtube.com/c/roselighting

https://www.rose-lighting.com/blog

https://www.rose-lighting.cn

https://roselighting.en.alibaba.com

Thanks for your attention

Shenzhen Rose Lighting Technology Co.,Ltd
Web: https://www.rose-lighting.com
Web: https://www.rose-lighting.cn/
https://www.youtube.com/c/roselighting
https://roselighting.en.alibaba.com
T: +86-186-7564-9004 (wechat ,whatsapp ,QQ ,skype)
E: [email protected]

 


Online Service
Live Chat