- Description
- Global Tab
50mmX30mm Size 3D led pixel ball Pixel dot Pendant or chain pixel dot
https://youtu.be/29B4Hz8ddUA
Specification
Part NO | RL–ICRGB-50mmX30mm |
Lighting Source | 8pcs SMD3535 RGB LED |
Beam Angel | 360 degree |
Operate Voltage | DC24V |
Consumption Watt/M | 1.4Watt (max) |
size (mm) | 50mmX30mm |
Material | ABS |
IC chip | SN16703 |
Cover | Clear |
Waterproof Grade | IP65 |
Lifetime | 50000H |
Working temperature | -20℃-60℃ |
Storage temperature | -30℃-80℃ |
Picture
Accessories:
Power supplies
Controllers, DMX
Installation connectors
Mounting brackets
Suspension cable systems
Feature
1- This is one new 3D string light, the colour is changeable full colour;
2- 8pcs SMD3535 RGB LEDs inside of one light;
3- dmx512 IC chip
4- Double sides lighting design,360 degree viewing
5-Easy installation,convenient maintenance,reliable and safety with low voltage input
6- Application place: Night club,disco, staging light,and event etc.
remark
a pixel dot pendant in clear ABS suspended on semi clear translucent electrical cables
Available as single pixel pendants on individual cables or as vertical or horizontal light chains of
various numbers. Length can be confifigured to the desired shape in our factory prior to shipping
Each is made of a double-sided LED circuit and a UV Stabilised transparent polycarbonate prism.
All units are dimmable in groups, the size of a group depends upon the required layout and light effects
Static 3000°K or 4000°K and twin white modules are available!
3D led pixel point light ball lighting effect
Color and effect: addressable lights you can set to any color or animate, like running water,chasing and scanning etc.
depending on the different installation methods may compose different dynamic effect of different color’s character and design
Other 3D Pixel led ball optional
this Type can be used indoor only! (30mm25mm size)
clear cable and black cable optional
Controller System
1. SD Controller T400K, T500K, T4000C, K1000C, K8000C; Online Controller; Artnet;Arduino and DMX controller.
2. Software to make program, now we often use LEDEDIT, LED EASY and MADRIX.
3.Contact me for more information.
Normal Controller
.Connection
1. Signal wire:DC+, DAT, GND.
2. DC+ and GND connect to power supplier; DAT, CLK and GND connect to controller.
3. Relative Controller: SPI controller, DMX controller .
4. SPI Signal:LED pixels + LED Power Supply + LED Controller.
5. DMX Control:LED pixels + LED Power Supply + DMX Controller + DMX Decoder.
6. LED Power Supply:meanwell power supply or some other qualitified power supply (waterproof/non- waterproof).
Video show
https://www.youtube.com/watch?v=azxqqVZ6dfA
https://youtu.be/fQBAZX5OkDE